Wallmaster Acrylic enamel Gloss is tough 100% acrylic enamel finish designed for use on all interior and exterior doors, architraves, skirting boards, window frames and trim. The product provides a durable, hard wearing and scratch resistant finish that will not yellow and is resistant to most household stains.
This acrylic enamel product has good working time for ease in application and provides a smooth and uniform finish. Touch dry in 30 minutes so surfaces won’t stick together making it the ideal product for new construction environments.
| Available Sizes: | 1, 4, 10 Litre |
| Clean up: | Water |
| Coverage: | 14m2/Litre |
| Volume Solids: | 38% |
| Touch Dry: | 30 Minutes |
| Recoat: | 2 Hours |
| Gloss Level: | 80% @ 60 0C |
| V.O.C | <52gL |
This water-based formula is suitable for pre-primed MDF, primed aged enamels, all timbers, meranti timber, cement sheet, galvanized metal, and aluminum surfaces.
It has excellent flow and levelling properties to give a smooth and uniform satin finish. Do not use this product for any other purpose than as specified in our literature.
Stir well before use with a flat paddle or with a metal paint stirrer using an up and down scooping action. Apply two coats Wallmaster Acrylic Enamel. For best results use a new unused 4 to 10 mm micro fibre or blue seamless foam roller cover.
Remember, worn roller covers will produce a poor result. Brush application is best achieved with a synthetic trim brush designed for skirtings and architraves.
The number of coats required to achieve full cover will depend on the primers and sealers used during preparation, application technique and / or the underlying substrate colour.