Wallmaster Superwash Antimicrobial Low Sheen is a hard wearing highly scuff and scrub resistant interior wall finish with outstanding washability and stain removal properties.
Superwash Antimicrobial Low Sheen is treated during manufacture with a proprietary antimicrobial additive that is based on proven silver ion technology which is FDA, EPA and food contact approved and is also registered on the European BPR
| Available Sizes: | 1, 4, 10, 15 Litre |
| Clean up: | Water |
| Coverage: | 14m2/Litre |
| Volume Solids: | 39% |
| Touch Dry: | 30 Minutes |
| Recoat: | 2 Hours |
| Gloss Level: | 6.2% @ 60 0C |
| V.O.C | <1gL |
The product glides on evenly then levels to an ultra-smooth finish with an elegant look. It provides a tough, long lasting finish which bonds extremely well to the surface and meets the A.P.A.S. very low VOC targets.
Interior, paper faced boards, plaster, fibrous plaster, cement sheet, masonry and brick. Do not use this product for any other purpose than as specified in our literature.
Stir well before use with a flat paddle or with a metal paint stirrer using an up and down scooping action. Apply two coats Wallmaster Superwash Antimicrobial Low Sheen. For best results use a new unused 10 to 12 mm synthetic roller cover. Remember, worn roller covers will produce a poor result.
The number of coats required to achieve full cover will depend on the primers and sealers used during preparation, application technique and / or the underlying substrate colour.