EC-2000 Extreme is a Crack Bridging 100% acrylic, elastomeric wall coating that provides the elongation and elastic recovery necessary to bridge continually moving cracks in a masonry wall. Cracks are easily bridged during initial application and remain bridged throughout the worst ravages of cold winters and hot humid summers and maintains a positive waterproof seal to masonry and texture finished walls.
The product has high resistance to Carbon Dioxide Permeability making it ideal for seafront and inter-city masonry wall applications. The cured film is tough and highly elastic and incorporates topical strength anti-mould and mildew protection that will resist film growth even throughout Australia’s tropical regions such as far North Queensland.
| Available Sizes: | 1, 4, 10, 15, 20 Litre |
| Recommended DFT | 192 Microns |
| Coverage: | 2.5m2/Litre |
| Volume Solids: | 55% |
| Touch Dry: | 45 Minutes |
| Recoat: | 2 Hours |
| Gloss Level: | Low Sheen |
| V.O.C | <25gL |
Astec elastomeric wall coatings maintain their flexibility with time. Substrate movement, for whatever reason, leads to cracks. These cracks are easily bridged during initial application and remain bridged throughout the worst ravages of cold winters and hot summers.
Masonry and texture finished walls, pre-cast concrete, cement sheet, rendered walls, brick and concrete block. Do not use this product for any other purpose than that specified in our literature.
Application:
Stir well before use with a flat paddle or with a metal paint stirrer using an up and down scooping action. Apply two coats EC-2000 Gloss with a good quality synthetic brush or new unused 10 to 12 mm synthetic roller cover. For airless spray applications use a 518 to 523 tip.