Astec EC-5000 PCM Low Sheen is A Crack Bridging 100% acrylic, elastomeric waterproof membrane designed for the long-term waterproof protection, durability, and aesthetics of masonry walls.
The product exhibits outstanding exterior durability and possesses the excellent elasticity and elongation properties necessary to bridge continually-moving cracks without itself cracking or wrinkling.
Available Sizes: | 1, 4, 10, 15, 20 Litre |
Recommended D.F.T | 192 Microns |
Coverage: | 2.5m2/Litre |
Volume Solids: | 55% |
Touch Dry: | 45 Minutes |
Recoat: | 2 Hours |
Gloss Level: | Low Sheen |
V.O.C | <1gL |
Astec elastomeric wall coatings maintain their flexibility with time. Substrate movement, for whatever reason, leads to cracks. These cracks are easily bridged during initial application and remain bridged throughout the worst ravages of cold winters and hot summers.
The product ensures crack-free protection against the ingress of water and carbon dioxide. Moreover, its unique Dirtguard chemistry gives a high level of resistance to dirt pick-up.
Correctly prepared, masonry, brick, block, aerated concrete, fibre cement sheets and panel, PVC permanent formwork and all previously painted building facades.
Stir well before use with a flat paddle or with a metal paint wacker using an up and down scooping action. Apply two coats EC-5000 PCM Low Sheen with a good quality synthetic brush or new unused 10 to 12 mm synthetic roller cover. For airless spray applications use a 518 to 523 tip.