Energy Star Cool Pave Gloss is an Infrared Heat Reflective polycarbonate modified acrylic concrete pavement coating. It is designed for use as a vehicle resistant protective coating for masonry surfaces such as driveways, walkways, garage floors or any masonry surface exposed to moderately heavy vehicle traffic.
Energy Star Cool Pave Gloss is based on our proprietary Dirtguard Technology that brings a new level of exterior durability to the product. It employs aerospace industry polycarbonate technologies to give molecular level protection against damage from UV light, water, and environmental contaminants. Outstanding adhesion, flexibility and mould resistance is designed into the product utilising over four decades of formulation experience with our harsh Australian conditions.
| Available Sizes: | 1, 4, 10, 15 Litre |
| Dry Film Thickness | 180 Microns D.F.T |
| Coverage: | 2.33m2/Litre |
| Volume Solids: | 42% |
| Touch Dry: | 45 Minutes |
| Recoat: | 1-2 Hours |
| Gloss Level: | 75% @ 60 0C |
| V.O.C | <28gL |
This water-based formula is suitable for correctly prepared concrete, Masonary, pavers and brick surfaces. All surfaces must be clean dry and free of contaminants. Remove dirt, dust from the surface with a high-pressure cleaner or for small areas with a stiff bristle broom and garden hose.
The product is extremely tolerant to chemicals released form vehicle engines, transmissions and braking systems such as grease, engine oils, transmission fluids, coolants and washer fluids. Most importantly, the product offers outstanding resistance to softening and hot tyre pick-up form automotive tyres.
Stir well before use with a flat paddle or with a metal paint stirrer using an up and down scooping action. Apply two coats Energy Star Cool Pave Gloss with a good quality synthetic brush a new unused 4 to 6mm foam roller cover.
Although the product can be walked on generally within one to two hours for recoat purposes, allow the product to cure for 24 hours in direct sun before full pedestrian access is given.