products

Tileshield PCM Gloss

An Infrared Heat Reflective Cement Tiled Roof Coating with Superior UV and Fade Resistance.

Tileshield PCM Gloss is a Heat Reflective cement tiled roof coating that reflects fully 50% of solar heat by infrared reflection. Even in darks colours, the products low solar absorbance and high emittance value will significantly reduce absorbed heat in the roof.

The product is ultra-UV tough, fade resistant and will retain its rich depth of colour for the life of the paint. It is a smooth, nonabrasive finish that gives off a warm, subtle, and very natural glow and transforms a tiled roof into a cool and energy efficient roof with great street appeal.

Features
  • High Solar Reflectivity.
  • Complies with AS/NZS 4859.1.
  • Excellent water resistance = <1 g/24h/m2/kPa
  • Strong water resistance.
  • Mould and Mildew Protection.
  • 2 Hour recoat.
Benefits
  • Energy efficient, sustainable.
  • Cool Roof Technology
  • Superior fade resistance = 2800 hrs UVB testing, no chalking.
  • Excellent substrate protection.
  • Ideal for tropical climates.
  • Easy Water clean-up.
Product Data Sheet Material Safety Sheet
Available Sizes:1, 4, 10, 15, 20 Litre
Dry Film Thickness180 Microns D.F.T
Coverage:2.5m2/Litre
Volume Solids:42%
Touch Dry:30 Minutes
Recoat:2 Hours
Gloss Level:Gloss
V.O.C<50gL
Uses:

Tileshield PCM Gloss is a Heat Reflective cement tiled roof coating, perfect for all types of cement tile roofs when prepared correctly.

Your roof will be significantly cooler, tough and resilient to all weather conditions with an attractive finish that is guaranteed to outlast all other cement tiled roof coatings.

The product is formulated with our exclusive Dirtguard Technology that delivers a new level of durability to the coating. It employs aerospace industry polycarbonate technologies to give molecular level protection against damage from UV light, water and environmental contaminants.

Application:
  1. Stir well before use with a flat paddle or with a metal paint stirrer using an up and down scooping action.
  2. Apply one full wet coat of Tileshield PCM Gloss, to the entire roof surface. (Coverage rate not to exceed 5m² per liter). WFT 200 microns.
  3. Apply a second full wet coat of Tileshield straight from the drum at a coverage rate of no more than 5m² per liter. WFT 200 microns.
  4. The above coverage rates include average substrate profile area for concrete tiles.
  5. For airless spray applications use a 518 to 523 tip.
  6. Do not apply to surfaces that have had wax or silicone-based materials previously applied.

Do not apply when ambient temperature is below 10°C, above 35°C or when humidity is extremely high.