products

Tripleflex 3 in 1

Exterior sealer-primer-undercoat with good direct to substrate adhesion.

Tripleflex 3 in 1 is low odour, exterior grade sealer / primer / undercoat, with good opacity, direct to substrate adhesion and roller splatter resistance. The product is manufactured as a heavy bodied mica-based S/P/U that will provide excellent base coat opacity and good blister resistance on exterior timber and masonry surfaces.

The water-based formula improves adhesion and coverage of most acrylic or enamel topcoats. This is a base paint only and requires a colour selection to obtain the paint colour of choice.

Features
  • Good adhesion to all masonry.
  • Good adhesion to all timbers.
  • Heavy bodied and mica based .
  • Excellent inter-coat adhesion.
  • Water Based.
Benefits
  • Good primer coat over textures.
  • Good blister resistance.
  • Good grain fill.
  • Strong tie coat for acrylic paints.
  • Easy water clean up.
Product Data Sheet Material Safety Sheet
Available Sizes:4, 10, 15, 20 Litre
Clean up:Water
Coverage:9.6m2/Litre
Volume Solids:29%
Touch Dry:30 Minutes
Recoat:2 Hours
Gloss Level:Low Sheen
V.O.C<5gL
Summary:

This product can be applied directly to most timber, PVC, galvanised iron, Zincalume®, fibro cement, brick, masonry, new steel, and wrought iron surfaces. When not in use, it is thick and viscous for better pigment holding, but flows smoothly over surfaces after mixing.

  • Convenient 3-in-1 product for fast application
  • Provides good topcoat adhesion, hiding power, and blister resistance
  • Fast-drying – touch dry in 30 minutes, dry and ready for recoating in 2-3 hours
  • Suitable for use under most acrylic and enamel topcoats
  • Only 1 coat required in most cases
  • Stirring creates a smooth, creamy liquid that is easy to apply
  • Roller splatter resistance and low odour for a comfortable, easy application
  • The White Base can be used as is or tinted to match topcoat colour for increased opacity